|
Product Name
|
Conditioning Additive
|
|
Supplier
|
Just a Soap
South East Lodge
Rede Road
Whepstead
Bury St Edmunds
Suffolk
IP29 4ST
Tel: 01284
735043
|
|
Composition/Ingredients Information
|
Description:
cationic polymer in solution.
|
|
Hazard Identification
|
This product is
not classified as hazardous.
|
|
First Aid Measures
|
Inhalation
Move to fresh
air.
Eye
exposure
Flush
immediately with water for at least 15 minutes.
Contact
physician if symptoms persist.
Skin contact.
Wash with
soap and water.
Ingestion
Not considered
toxic.
|
|
Fire-Fighting Measures
|
Extinguishing
media
Carbon dioxide,
dry chemical, foam. Do not use a direct water-jet on burning material.
|
|
Accidental Release Measures
|
Personal
precautions:
Avoid
inhalation and direct contact with skin and eyes. Use individual protective
equipment (safety glasses, waterproof-boots, suitable protective clothing)
in case of major spillages.
Spillage
Remove
ignition sources. Provide adequate ventilation. Avoid excessive inhalation
of vapours.
Gross spillage
should be contained immediately by use of sand or inert powder and disposed
of according to local regulations.
Environmental
precautions
Keep away
from drains, surface and ground water, and
soil.
|
|
Handling and Storage
|
Precautions
in handling:
Apply
good manufacturing practice and industrial hygiene practices, ensuring
proper ventilation. Observe good personal hygiene, and do not eat, drink or
smoke whilst handling.
Storage
conditions:
Store
in tightly closed original container, in a cool, dry and ventilated area
away from heat sources and protected from light. Keep air contact to a
minimum.
Fire
protection:
Keep
away from ignition sources and naked flames. Take precautions to avoid
static discharges in working area.
|
|
Exposure Control/Personal Protection
|
Respiratory
protection:
Avoid
breathing product vapour. Apply local ventilation where possible.
Ventilation:
Ensure
good ventilation of working area.
Hand
protection:
Avoid
all skin contact. Use chemically resistant gloves if required.
Eye
protection:
Use
safety glasses.
Work/Hygiene
practices:
Wash
hands with soap and water after handling.
|
|
Physical and Chemical Properties
|
Appearance: colourless to pale yellow liquid.
Odour :
Slight.
PH: 5-7
Flash Point:
>100deg C
Flammability:
not flammable.
Auto
flammability: >200 deg C
Vapour
pressure: no data available.
Relative
density: no data available.
Solubility in
water: completely miscible.
Viscosity:
<10,000 cps
|
|
Stability/Reactivity
|
Reactivity:
It
presents no significant reactivity hazards, by itself or in contact with
water. Avoid contact with strong acids, alkali or oxidising agents.
Decomposition:
Liable
to cause smoke and acrid fumes during combustion: carbon monoxide, and
other non-identified organic compounds may be formed.
|
|
Toxicological Information
|
This product
is not expected to be toxic by skin contact or inhalation.
|
|
Ecological Information
|
This product is not expected to bioaccumlate.
|
|
Disposal Considerations
|
Avoid disposing into drainage systems and into the
environment.
|
|
Transport Information
|
Road
(ADR/RID): n/a
Air
(IATA): n/a
Sea
(IMDG): n/a
|
|
Regulatory Information
|
Classification
Packaging / Labelling (Directive 1999/45/EC)
|
|
Other Information
|
The
data provided in this material safety data sheet is meant to represent
typical data/analysis for this product and is correct to the best of our
knowledge. The data was obtained from current and reliable sources, but is
supplied without warranty, expressed or implied, regarding its’ correctness
or accuracy. It is the user's responsibility to determine safe conditions for
the use of this product, and to assume liability for loss, injury, damage
or expense arising from improper use of this product. The information
provided does not constitute a contract to supply to any specification, or
for any given application, and buyers should seek to verify their
requirements and product use.
|